Vehicle Table Setup Pricing

The vehicle area pricing is based on the Provehiclewrap.com vehicle area wrap table.  While the table is good at calculating the basic overall area of the vehicle pricing in the table do not accurately reflect the actual size of the vehicles.  Errors in this table:

• It states that there is bleed on the measurements, many of the measurements are exact to the side of the vehicle (driver pass and rear)
• The template does not take into account for the front or rear bumper – either the bumper are not included into the area or no additional material is added to the template to account for bumpers to be printed in 1 piece.
• Rear values do not account for the top of trunks on sedans which is a vital part of the vehicle wrap for full wraps.
• Measurements do not take in to account the flat portion of the vehicles; the Dodge Promaster had 5 inches of “side graphic” on the roof and 3” as part of the kick panel that are not included in the measurements.

We do have the table on here as it is the only available in the industry.   We have modified the table to reflect some of these elements as part of the necessary area to be printed for a good clean finished product; our numbers are higher but also include front bumper, top.  But our number are only CLOSE.  The most accurate is the pre-press the vehicle and see the exact print area required for your product.  Your pre-pressing of the file should account for all additional printed graphics needed for a good install.

If your design has not pre-pressed the vehicle for you, we recommend having us prepress the vehicle to insure it is printed with enough bleed to make wrapping feasible.  For the best most accurate way to get this pre-pressed by us and we will guarentee it coverage.